|
|
BC845DL - Intel Socket 478 Pentium 4 ATX MB
General Functions
• CPU: Supports Intel mPGA 478 Pentium 4 up to 2.6 GHz or above (with system bus frequency of 400 MHz) • CPU Socket: Intel Socket 478 • BIOS: Award 4Mb FWH BIOS • Chipset: Intel 82845 • I/O Chipset: SMSC LPC47M192 / ITE IT8661F • Memory: Onboard two 184-pin DIMM sockets Support up to 2 GB PC2100/ PC1600 DDR ECC/ Non ECC memory • Enhanced IDE: Supports up to four IDE devices. Supports Ultra DMA 33/66/100 mode with data transfer rate up to 100MB/sec. (20 x 2 header x 2 onboard) • FDD Interface: Supports up to two floppy disk drives, 5.25" (360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 MB, and 2.88 MB) • Parallel Port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes • Serial Port: 4 serial port - 2 x DB9 (16C550 Fast UART Compatible) and 2-pin header set for serial port with RS-422/485 feature (ITE8661 for second set of 16C550 UART) • IR Interface: Supports one IrDA Tx/Rx header • KB/Mouse Connector: Two 6-pin mini-DIN connectors support PS/2 keyboard and mouse • USB Connectors: Four USB ports onboard. Dual external USB connectors and one 5 x 2 header supports additional dual USB ports • Power Management: Supports P4 ATX power supply.
VGA Interface • Interface: One AGP 4X/2X slot (1.5 V AGP only)
Audio Interface • Chipset: Intel 82801BA ICH2 • AC97 Codec: AD1885 • Audio Controller: AC97 ver. 2.1 compliant interface, Multi-stream Direct Sound and Direct Sound 3D acceleration • Audio Interface: 3 x Audio and Phone Jacks for Microphone in, Line in,Lline out. Box headers for Tel in, CD audio in, and Aux in • Game/MIDI Interface: Supports Game/MIDI port onboard
Ethernet Interface • Chipset: Intel 82801BA ICH2 built-in PCI-bus Ethernet controller with Intel 82562ET onboard • Ethernet Interface: PCI 100/10 Mbps, IEEE 802.3U compatible • Remote Boot-ROM: For diskless system
Expansion Interface • AGP Slot: One AGP 4X/2X slot onboard • PCI Slot: Four 32-bit PCI slots onboard • ISA Slot: One shared PCI/ISA slot and one ISA slot onboard
Mechanical and Environmental • Power Supply Voltage: +3.3 V, +5 V, +12 V, +5 VSB, -5 V • Operating Temperature: 32 to 140° F (0 to 60° C) • Board Size: ATX form factor, 12" x 9.6" (305 mm x 244 mm) • Weight: 0.5 Kg |
