BCM Advanced Research, a supplier of embedded motherboards and intelligent systems
BCM Advanced Research
Delivering Quality Intelligent Computing Systems
* EOL Notice: THE NX260N IS ON THE PHASE-OUT LIST. BCM is accepting last time buy (LTB) orders through May 03, 2016.  All last time buy orders may be scheduled to ship through August 03, 2016 with a non-cancellable and non-returnable (NCNR) PO. BCM may continue to accept orders for this product on a build to order basis with minimum order quantities. For a replacement product please consider our MX3150N, ECM-BSW-3150N, AR6MXCS. For detail, please read the Official Release [PDF]
BCM’s NX260N nano-itx motherboard is designed based on the 3rd generation Intel® Atom™ architecture. The board is equipped with the Atom™ N2600 processor onboard with Intel® NM10 chipset together provides rich I/O capabilities and flexibility via high bandwidth PCI, PCI-Express, Serial ATAII and USB 2.0 interface. Based on 32nm processor technology, the NX260N nano-itx motherboard features terrific performance-per-watt delivering a low 5.6W combined CPU + chipset power consumption allowing for fanless operation idea for an embedded device that requires 24/7 operation such as industrial controls, test equipment, retail POS or store shelf digital signage displays, self-serve Kiosks, public transportation signage, department store price checkers, and mobile or battery operated hospital computers on wheels (COWs). 
Product Features
Bookmark and Share
  • Intel® Atom™ N2600 1.66 GHz Dual Core processor onboard
  • Intel® NM10 Chipset
  • Supports up to 2 GB DDR3 800/1066 MHz system memory
  • Dual Display: VGA, 18/24-bit Dual Channel LVDS
  • 2 x SATA
  • 6 x USB 2.0
  • 2 x COM
  • 1 x Mini PCIe
  • Fanless Operation
  • Low profile heatsink
  • 12V DC-in Power
  • Nano ITX Small Form Factor (4.7" x 4.7")
NX260N, Intel Cedar Trail N2600 Fanless Nano ITX

Click Thumbnail to Enlarge
Product Description
CPU Onboard Intel® Atom™ N2600 1.6GHz Processor
System Chipset Intel® NM10 Chipset
System Memory One 204-pin SODIMM socket supports up to 2GB DDR3 1066/1333 MHz SDRAM
I/O Chip Winbond W83627DHG-A
Expansion 1 x Mini PCI Express (back)
Watchdog Timer Reset: 1 sec. ~ 255min. and 1sec. or 1min./step
H/W Status Monitor Monitoring System Temperature, Voltage, with Auto Throttling Control
Smart Fan Control Supports 3 modes (Silent/Optimal/Performance)
S3 / S4 S1, S3, S4, S5
TPM n/a
Graphics Engine Integrated Intel® GMA 3600 Graphic Core
Display Memory Shared Memory Max 1GB
Display Interfaces LVDS : Max 1280 x 800 or 1366 x 768
VGA : Max 2048 x 1536 @ 60Hz
Display Capability LVDS+VGA
Rear Panel I/O
KB/MS n/a
Audio Line-out
USB 2 x USB 2.0
COM (Serial Port) n/a
LAN 1 x RJ4
VGA 1 x DB-15
DVI n/a
HDMI n/a
DisplpayPort n/a
DC-in 1 x DC-in Connector
Onboard I/O
LVDS 1 x LVDS and 1 x Inverter Header
USB 2 x USB Header (4 Ports)
COM (Serial Port) 2 x RS-232 Headers
SATA 2 x SATA Connectors and 1 x SATA Power Header
DC-in ---
MIO 1 x 8-bit GPIO Header (4 In/ 4 Out), 1 x Fan Headers, 1 x AMP Header, 1 x Onboard Buzzer
Audio Codec Realtek® ALC892 HD Audio
LAN1 Realtek RTL 8111E Gigabit LAN
LAN2 ---
Mechanical and Environment
Power Type 12V DC-in
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
Operating Humidity 5%~90% Relative humidity, non-condensing
Storage Humidity 5%~ 90% Relative Humidity, Non-condensing
Form Factor Nano ITX
Dimensions (L) x (W) 4.7” (L) x 4.7” (W)
Weight 0.4 lbs
Ordering Information
Part No. Description
NX260N Intel N2600 1.66 GHz processor onboard, Intel NM10 Chipset, LVDS, VGA, Mini PCIe, 2 COM, 6 USB, 2 SATA II, DC-in, Fanless
Accessories Included 1 x COM port cable
1 x SATA Power cable
1 x USB Dual port cable
1 x Mini PCIe screw set
2 x Hex screws for COM port cable
4 x screws for USB cable
183000000006    2.00mm pitch 12” length Serial cable
182437200040    2.54mm pitch 14” length Dual port USB cable w/ full height bracket
* All product specifications and product images are subject to change without notice. Last update: 06/09/2015

About BCM
BCM Advanced Research (BCM) is a leading developer and manufacturer of x86/ARM RISC embedded industrial motherboards and systems for ODMs and OEM that integrate computing technology into their products. We own a very strong R&D engineering team and operation department based in Southern California in order to provide prompt project develop support and instant problem solving assistance.