| 12/20/2011 |
End of life (EOL) notice for the BI250-945GSE small form factor industrial PC. [Download PDF] |
| 09/29/2011 |
Packaging / Accessory change notice for the MX45GM and MX45GM2 industrial motherboards. The change pertains to adding a second source for the CPU heatsink (metal only) to ensure consistent availability and reasonable lead-times. Functionally the two heatsinks are identical. The CPU cooling fan will be the same for both heatsinks.
[Download PDF - MX45GM2], [Download PDF - MX45GM] |
| 09/02/2011 |
BIOS PCN to increase the compatibility of the MX525DC mini ITX motherboard with a broader range of USB hubs. [Download PDF] |
| 08/10/2011 |
PCN for the MX45GM mini ITX motherboard. This notice is to pre-advise our MX45GM customers that the MX45GM will undergo a hardware change to comply with the UL Second Edition requirements. Specifically adding a fuse to the DVI port and reducing the fuse size on the USB ports.
Additionally a new audio codec chip revision has been added to the approved vendor list as the current audio codec is being phased out. [Download PDF] |
| 05/16/2011 |
PCN for the MX45GM industrial mini ITX motherboard. This change involves changing the value of a capacitor to improve the compatibility of the MX45GM with a broader range of DC power sources. [Download PDF] |
| 04/20/2011 |
PCN for the MX45GM2 Mini ITX industrial motherboard. The changes include updating fuse circuitry to comply with the UL 2nd edition regulations and updating the bill of materials to add the new audio chip ALC886 due to the current audio chip ALC888 going end of life. This audio chip change may require a driver update.
Please note the phase-in for these changes are expected for Q3-2011. [Download PDF] |
| 03/18/2011 |
End-of-life (EOL) notice for the MX945GME Mini ITX industrial motherboard. BCM will continue to accept orders for the MX945GME through September 30th 2011. If you will require products beyond September please contact your BCM representative to arrange your last time buy orders which BCM can schedule through March of 2012. For a replacement product please consider our MX45GM or new MX67QM. [Download PDF] |
| 02/02/2011 |
PCN for the BC45Q enterprise class industrial ATX motherboard. This change encompasses changing a capacitor form factor to a low profile type to accommodate extended length PCI cards. This is strictly a BOM and package change and does not impact the electrical functionality of this product. This will be a running change. [Download Notice] |
| 01/19/2011 |
PCN for the MX45GM Mini ITX industrial motherboard. This change has been made to accommodate a wider selection on off-the-shelf mini ITX chassis by reducing the height of compact flash connector on the bottom of the MX45GM by switching to a low profile CF socket. The change is mechanical only and does not affect the functionality, BIOS or drivers or software images, or any certifications. This will be a running change anticipated to take effect in Q2/2011. [Download Notice] |
